How To Use Ikea Tradfri Bulbs with Philips Hue



When it comes to smart lighting, Philips Hue is the market leader (UK) with a range of bulbs, luminaires and accessories, plus a good app and comprehensive integration to other smart systems. On the other hand, Ikea’s Tradfri is more basic but with the important benefit of being cheap and widely available in Ikea’s stores.

Inevitably, the question crops up… can Tradfri bulbs be used with Philips Hue? The short answer is yes as the Tradfri bulbs use the Zigbee system to communicate, just like Hue. The slightly longer answer is that while it’s possible, there are a number of steps in the process to get the Tradfri bulb transferred reliably onto the the Hue system. This article runs through those steps and the included video will show them too.

As a side note, the cost benefit of Ikea bulbs over Philips isn’t what it used to be, as the price of Hue bulbs, especially white, has significantly dropped in the past year or two, especially with regular 3-for-2 deals. Where the Tradfri bulbs really score though is on brightness. The brightest Hue bulb is around 800 lumens (lm) whereas Tradfri does 1000 lm, which is a noticeable difference. I now have three 1000 lm Tradfri bulbs in my home setup for spaces that would otherwise be too dim using Hue lights.

Let’s cut to the chase….here are my steps to painless use of Tradfri bulbs with Hue.

Part 1 – Tradfri Setup

  1. Buy (or borrow) a Tradfri gateway, dimmer (or other steering device, as Ikea calls them) and bulb(s). Ok, you might not need the gateway and dimmer but my experience suggests it makes life a whole lot easier (you can try going to Part 3 directly). Yes, it puts the price up so maybe this is a chance to ask around and see if you can nip round to a friend’s house to do the first part.
  2. Connect up the gateway with power and a network cable. Wait for all three lights.
  3. Download the Ikea Tradfri app to your phone. Run the app and pair with the gateway – all you have to do is scan a QR code on the back of the gateway.
  4. Continue to the use the app to walk you through the linking process for the dimmer. Pair the dimmer with the gateway by holding down the link button until the lights on the gateway flash. Read the instructions for other steering devices. The app will confirm correct linking.
  5. Plug the bulb into a handy lamp or light fitting and turn it on. The bulb should be lit. Make sure the lamp can be turned on and off easily – you’ll need it later.
  6. Again using the Tradfri app, go through the process of pairing the dimmer with the bulb. Hold the dimmer close to the bulb and press the link button. Watch the app to confirm linking.
  7. The bulb should now be shown in the app and can be controlled with the dimmer. Try it out to make sure.

Part 2 – Update and Disconnect

  1. The next step is to ensure that the bulb’s firmware is up-to-date. Use the Tradfri app to check  and update as necessary. This step is important in case the bulb is an old model with incompatible firmware. Updating to the latest version will remove the incompatibility.
  2. Next, use the app to disconnect the bulb from the gateway. Yes, I know it’s only just been added but trust me. Follow the instructions and use the dimmer. Don’t turn the light off yet.

Part 3 – Connect to Hue

  1. In the next part, you will need to be able to hold the Tradfri bulb very close to the Hue hub. Sort that out first.
  2. I recommend an app called Hue Essentials. It works with both Hue and Tradfri systems, but it’s only available for Android. The reason to recommend Essentials is that it supports a feature called Touchlink. It does have in-app purchases but you don’t need to pay for any of them. There must be similar Hue apps for iOS – look for ones that support Touchlink.
  3. Use Hue Essentials to find and select the Hue hub. Ignore the Tradfri one. You can even turn it off.
  4. Navigate to the part of the app to add or search for new bulbs. It should be like the screen shot on the right.
  5. To reset the Tradfri bulb, you need to switch it off and on six times. A steady quick pace does the job.
  6. Now position the bulb right next to the Hue hub.
  7. In Hue Essentials, press the “Touchlink” button in the bottom right. I find you often have to press it twice to work properly.
  8. If successful, the Tradfri bulb will start to pulse. At this point, press the “Search for Lights” button at the top. With luck, Hue Essentials will find the bulb and add it into the Hue system. Sweet!
  9. That’s it. Now the Ikea bulb is in the system, it can be used as any other Hue bulb. Mine was allocated to “Garden” and then set to come on when motion was detected at the back of the house. I’ve had no problems in several weeks of use.

If you’d like to see these steps in action, then check out the video below which goes through all the steps. It’s about 20 minutes overall. Get a drink.

Any problems or issues, leave a comment below and I’ll see if I can help.


2 thoughts on “How To Use Ikea Tradfri Bulbs with Philips Hue

  1. I disagree. They’re currently the only source of 1000 lm white bulbs. Every other supplier I’m aware of only offer bulbs in the region of 800 lm. I have bought four Ikea Tradfri 1000 lm bulbs. All worked with the Tradfri hub fine, but one of them refused point blank to work with Hue. The others have been in my setup now for over a month and work as if they were Hue bulbs. I can’t comment on the quality of other bulbs as I haven’t used them. What’s your experience been?

  2. What a dreadful article.. What you should be saying is how bad ikea bulbs are and are not worth using..

Leave a Reply

*

This site uses Akismet to reduce spam. Learn how your comment data is processed.