I recently moved my one and only television, a Samsun 52″ LCD HDTV, from the front room of my home into the back room. In doing this, I lost the connection to a TV antenna I had mounted on the outside of my home. While I don’t watch a lot of over-the-air TV, it was nice to have access to the channels I could get. I tried a basic set of non-powered rabbit ears to pick up some channels after the TV move. But it didn’t pick up anything. I figured for sure I’d either have to move my external TV antenna (not a fun task) or just give up on over-the-air TV all together. Luckily for me, I was offered the chance to review a 1byone Amplified HDTV Antenna.
The 1byone Amplified HDTV Antenna comes with everything you need to use it: The antenna with built-in ten-foot coaxial cable, the inline amplifier, A/C adapter for the amplifier, three double-sided 3M adhesive pads, and the product manual. Installation is pretty straightforward. Connect the amplifier to your television’s antenna input, connect the antenna to the amplifier, connect the amplifier to the A/C adapter, and plug the adapter into an available power outlet.
Thanks to a handy guide from AntennaWeb, I know that most of the TV transmitters in my area are positioned to the northwest. My first attempt with the 1byone antenna was to hang it as high as possible in the northwestern-facing corner of my room.
I ran the auto program feature on my TV. It didn’t pick up any channels.
In the antenna’s manual, it states that if you have trouble getting TV signals, you should place the antenna as high as possible and/or put it near a window. For good measure, I moved the antenna to the opposite corner of my room, ran the auto program sequence and again, came up with nothing.
I then moved the antenna next to a window and tried again. This time, success!
With the antenna next to the window, I was now able to receive six channels. A nice improvement over the other attempts. The HD picture and sound were crystal clear and the stability of the signal was rock solid with no dropouts.
I know some readers will see the result of six channels as unacceptable. But, I think it’s great. I don’t live in a major metropolitan area, and even with my external antenna, I didn’t get many more channels than this. The 1byone Amplified HDTV Antenna promises a range of up to 50 miles. I’m certain that if you live in the orbit of a large city, you’ll be able to easily pick up many more chances with this antenna.
1byone describes this antenna as “paper thin” and they’re not kidding. The antenna is very thin and light. It’s easy to move about the room and try in different locations. I’d recommend using one of the supplied double-adhesive pads until you’ve found a permanent place for the antenna. It’s light enough that one adhesive pad will hold it on the wall, but you’d probably want to use more than one to hold it in place long term.
The 1byone Amplified HDTV Antenna is available for purchase for $36.99 direct from 1byone. It’s also currently available on Amazon for $29.99.