On review today is the G-Technology G-Drive Mobile, a 1 TB mobile external hard drive. Aimed squarely at the Apple MacBook crowd, the brushed aluminium finish and white LED compliments the host machine, and the combination of both USB3 and FireWire 800 show its Mac heritage. Of course the drive can be formatted for Windows or Linux use but the G-Drive is pre-formatted for HFS+ and is TimeMachine-compatible. As expected, the G-Drive is bus powered so there’s no power adaptor.
The G-Drive Mobile has a couple of touches that set it apart from the other mobile drive offerings. To start with, it comes with all the cables that might be needed, so in the box there’s a USB3 cable, a FireWire 800 cable and a FireWire 400 to 800 cable. There’s no getting the box home only to find the cable need for your setup is missing.
Second, the packaging presents the G-Drive to best effect and the “Getting Started” instructions are printed on the inside lid of the box. Again, it comes back to appealing to the Apple crowd who expect good design.
But enough of how it looks. How does it go? Pretty well actually. Connected up to USB 3, the G-Drive Mobile recorded the following data rates:
I’m fairly sure that those figures make G-Drive Mobile the fastest USB3 unit tested, beating the previous holder by a considerable margin. Under FireWire 400, the figures were obviously slower, but are provided here for comparison.
- hdparm gave 36 MB/s for buffered disk reads.
- dd gave write speeds around 22 MB/s.
- bonnie++ gave 22 MB/s for writes and 55 MB/s for reads.
Price-wise, the model here costs £129.95 but if you want USB3 only, there’s a much sleeker and cheaper version at £109.95 in the Apple store. However, if you need FireWire with USB3, the model viewed above is hard to beat, giving historical compatibility with older gear while also offering fast data transfers on newer kit.
Thanks to G-Technology for providing the G-Drive Mobile to review.